MF9261 NON-DESTRUCTIVE EVALUATION SYLLABUS | ANNA UNIVERSITY ME MANUFACTURING ENGINEERING ELECTIVES SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E MANUFACTURING ENGINEERING DEPARTMENT ELECTIVES SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010
MF9261 NON-DESTRUCTIVE EVALUATION L T P C
3 0 0 3
AIM:
To stress the importance of NDT in engineering.
OBJECTIVES:
To introduce all types of NNDT and their applications in Engineering.
UNIT I NON-DESTRUCTIVE TESTING: AN INTRODUCTION, VISUAL
INSPECTION & LIQUID PENETRANT TESTING 6
Introduction to various non-destructive methods, Comparison of Destructive and Non
destructive Tests, Visual Inspection, Optical aids used for visual inspection, Applications. Physical principles, procedure for penetrant testing, Penetrant testing materials,
Penetrant testing methods-water washable, Post – Emulsification methods, Applications
UNIT II EDDY CURRENT TESTING & ACOUSTIC EMISSION 10
Principles, Instrumentation for ECT, Absolute, differential probes, Techniques – High
sensitivity techniques, Multi frequency, Phased array ECT, Applications.
Principle of AET, Instrumentation, Applications - testing of metal pressure vessels,
Fatigue crack detection in aerospace structures.
UNIT III MAGNETIC PARTICLE TESTING & THERMOGRAPHY 10
Principle of MPT, procedure used for testing a component, Equipment used for MPT,
Magnetizing techniques, Applications.Principle of Thermography, Infrared Radiometry,
Active thermography measurements, Applications – Imaging entrapped water under an
epoxy coating, Detection of carbon fiber contaminants.
UNIT IV ULTRASONIC TESTING & RADIOGRAPHY 10
Principle, Ultrasonic transducers, Ultrasonic Flaw detection Equipment, Modes of display
A- scan, B-Scan, C- Scan, Applications, Inspection Methods - Normal Incident Pulse-
Echo Inspection, Normal Incident Through-transmission Testing, Angle Beam Pulse-
Echo testing, Applications of Normal Beam Inspection in detecting fatigue cracks,
Inclusions, Slag, Porosity and Intergranular cracks. Principle of Radiography, Effect of radiation on Film, Radiographic imaging, Inspection
Techniques – Single wall single image, Double wall Penetration, Multiwall Penetration
technique, Real Time Radiography
UNIT V CASE STUDIES, COMPARISON AND SELECTION OF NDT
METHODS 9
Case studies on defects in cast, rolled, extruded, welded and heat treated components.
Comparison and selection of various NDT techniques. Codes, standards, specification
and pro cedures .
TOTAL: 45 PERIODS
REFERENCES:
1. Baldev Raj, Jeyakumar,T., Thavasimuthu,M., “Practical Non Destructive Testing”
Narosa publishing house, New Delhi, 2002
2. Krautkramer. J., “Ultra Sonic Testing of Materials”, 1st Edition, Springer – Verlag
Publication, New York, 1996.
3. Peter J. Shull “Non Destructive Evaluation: Theory, Techniques and Application”
Marcel Dekker, Inc., New York, 2002
4. www.ndt.net
MF9261 NON-DESTRUCTIVE EVALUATION L T P C
3 0 0 3
AIM:
To stress the importance of NDT in engineering.
OBJECTIVES:
To introduce all types of NNDT and their applications in Engineering.
UNIT I NON-DESTRUCTIVE TESTING: AN INTRODUCTION, VISUAL
INSPECTION & LIQUID PENETRANT TESTING 6
Introduction to various non-destructive methods, Comparison of Destructive and Non
destructive Tests, Visual Inspection, Optical aids used for visual inspection, Applications. Physical principles, procedure for penetrant testing, Penetrant testing materials,
Penetrant testing methods-water washable, Post – Emulsification methods, Applications
UNIT II EDDY CURRENT TESTING & ACOUSTIC EMISSION 10
Principles, Instrumentation for ECT, Absolute, differential probes, Techniques – High
sensitivity techniques, Multi frequency, Phased array ECT, Applications.
Principle of AET, Instrumentation, Applications - testing of metal pressure vessels,
Fatigue crack detection in aerospace structures.
UNIT III MAGNETIC PARTICLE TESTING & THERMOGRAPHY 10
Principle of MPT, procedure used for testing a component, Equipment used for MPT,
Magnetizing techniques, Applications.Principle of Thermography, Infrared Radiometry,
Active thermography measurements, Applications – Imaging entrapped water under an
epoxy coating, Detection of carbon fiber contaminants.
UNIT IV ULTRASONIC TESTING & RADIOGRAPHY 10
Principle, Ultrasonic transducers, Ultrasonic Flaw detection Equipment, Modes of display
A- scan, B-Scan, C- Scan, Applications, Inspection Methods - Normal Incident Pulse-
Echo Inspection, Normal Incident Through-transmission Testing, Angle Beam Pulse-
Echo testing, Applications of Normal Beam Inspection in detecting fatigue cracks,
Inclusions, Slag, Porosity and Intergranular cracks. Principle of Radiography, Effect of radiation on Film, Radiographic imaging, Inspection
Techniques – Single wall single image, Double wall Penetration, Multiwall Penetration
technique, Real Time Radiography
UNIT V CASE STUDIES, COMPARISON AND SELECTION OF NDT
METHODS 9
Case studies on defects in cast, rolled, extruded, welded and heat treated components.
Comparison and selection of various NDT techniques. Codes, standards, specification
and pro cedures .
TOTAL: 45 PERIODS
REFERENCES:
1. Baldev Raj, Jeyakumar,T., Thavasimuthu,M., “Practical Non Destructive Testing”
Narosa publishing house, New Delhi, 2002
2. Krautkramer. J., “Ultra Sonic Testing of Materials”, 1st Edition, Springer – Verlag
Publication, New York, 1996.
3. Peter J. Shull “Non Destructive Evaluation: Theory, Techniques and Application”
Marcel Dekker, Inc., New York, 2002
4. www.ndt.net
No comments:
Post a Comment
Any doubt ??? Just throw it Here...