TAMIL NADU MARCH 2013 12TH TIME TABLE TN 12TH 2013 TIME TABLE

TAMIL NADU MARCH 2013 12TH TIME TABLE TN 12TH 2013 TIME TABLE

DEAR STUDENTS TAMIL NADU 12TH PUBLIC EXAMINATION IS GOING TO START FROM 1ST MARCH 2013

IF YOU LIKE TO OPT FOR THE ENGINEERING COURSE PLEASE READ THIS ARTICLE WHICH WILL BE HELPFUL FOR YOU HOW TO GET GOOD ENGINEERING COLLEGE?

QUESTION PAPERS WILL BE ISSUED TO CANDIDATES AT 10.00 A.M. TEN MINUTES IS PROVIDED FOR READING THE QUESTION PAPER. ANSWER SHEETS WILL BE ISSUED AT 10.10 A.M. FIVE MINUTES IS PROVIDED FOR FILLING UP OF THE PARTICULARS ON THE ANSWER SHEET.

DURATION OF THE EXAMINATION IS THREE HOURS I.E., FROM 10.15 A.M. TO 1.15 P.M.

EXCEPT TYPEWRITING FOR WHICH DURATION WILL BE 2 1/2 HOURS FROM 10.00 A.M. TO 12.30 P.M.

DATE AND DAY	HOURS	SUBJECT
(1)	(2)	(3)
01.03.2013 FRIDAY	10.00 A.M. TO 1.15 P.M.	PART - I LANGUAGE PAPER - I
04.03.2013 MONDAY	10.00 A.M. TO 1.15 P.M.	PART - I LANGUAGE PAPER - II
05.03.2013 TUESDAY		NO EXAMINATION
06.03.2013 WEDNESDAY	10.00 A.M. TO 1.15 P.M.	PART - II ENGLISH PAPER - I
07.03.2013 THURSDAY	10.00 A.M. TO 1.15 P.M.	PART - II ENGLISH PAPER - II
08.03.2013 FRIDAY	-	NO EXAMINATION
11.03.2013 MONDAY	10.00 A.M. TO 1.15 P.M.	PART- III PHYSICS PART - III ECONOMICS
12.03.2013 TUESDAY	-	NO EXAMINATION
13.03.2013 WEDNESDAY	-	NO EXAMINATION
14.03.2013 THURSDAY	10.00 A.M. TO 1.15 P.M. 10.00 A.M. TO 1.15 P.M.	PART- III MATHEMATICS PART- IIIZOOLOGY PART - III MICRO BIOLOGY PART - III NUTRITION & DIETETICS

15.03.2013 Friday	10.00 a.m. to 1.15 p.m.	Part—Ill Commerce Part — Ill Home Science Part — Ill Geography
18.03.2013 Monday	10.00 a.m. to 1.15 p.m.	Part—Ill Chemistry Part — Ill Accountancy
19.03.2013 Tuesday	-	NO EXAMINATION
20.03.2013 Wednesday	-	NO EXAMINATION
21.03.2013 Thursday	10.00 a.m. to 1.15 p.m.	Part—Ill Biology Part — Ill History Part — Ill Botany Part — Ill Business Maths
22.03.2013 Friday	-	NO EXAMINATION
25.03.2013 Monday	10.00 a.m. to 1.15 p.m. 10.00 a.m. to 12.30 p.m.	Part—Ill Communicative English Part — Ill Indian Culture Part — Ill Computer Science Part — Ill Bio-Chemistry Part — Ill Advanced Language Part — Ill Typewriting Tamil and English
26.03.2013 Tuesday	-	NO EXAMINATION
27.03.2013 Wednesday	10.00 a.m. to 1.15 p.m.	Part—Ill Political Science Part — Ill Nursing (General Stream) Part — Ill Statistics THEORY OF VOCATIONAL SUBJECTS

KONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY CONFERENCE 2013 INNOVATIONS IN COMPUTING AND COMMUNICATION TECHNOLOGIES 2013

KONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY CONFERENCE 2013 INNOVATIONS IN COMPUTING AND COMMUNICATION TECHNOLOGIES 2013

KONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY INNOVATIONS IN COMPUTING AND COMMUNICATION TECHNOLOGIES 2013 CSE COMPUTER SCIENCE ENGINEERING CONFERENCE ON APRIL 5TH 2013

INNOVATIONS IN COMPUTING AND COMMUNICATION TECHNOLOGIES 2013

DATE OF CONFERENCE : APRIL 5TH 2013

ORGANISED BY CSE COMPUTER SCIENCE ENGINEERING

FULL PAPER SUBMISSION: 08/03/2013
ACCEPTANCE NOTIFICATION: 12/03/2013
CAMERA READY PAPER SUBMISSION WITH DD: 18/03/2013
DD AMOUNT: RS:600/-
FOR CSI MEMBERS: RS: 500/-

TO READ MORE DETAILS PLEASE VISIT http://kongunadu-engg.com/files/Activities/2013/CSE_NC.pdf

FOR LATEST CONFERENCE AND OTHER UPCOMING EVENTS CLICK HERE

LOCATION AND ROUTE MAP FOR KONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY:

View Larger Map

KONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY WORKSHOPS 2013 NETWORK SIMULATOR 2 2013

KONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY WORKSHOPS 2013 NETWORK SIMULATOR 2 2013

KONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY NETWORK SIMULATOR 2 2013 CSE COMPUTER SCIENCE ENGINEERING NATIONAL LEVEL WORKSHOP ON MARCH 8TH 2013

NETWORK SIMULATOR 2 2013

DATE OF WORKSHOP : MARCH 8TH 2013

ORGANISED BY CSE COMPUTER SCIENCE ENGINEERING DEPARTMENT

TO REGISTER ONLINE PLEASE VISIT http://www.kongunadu-engg.com/files/Activities/2013/NS_2.pdf

This useful information Submitted by CLESTA, Department of Computer Science and Engineering Association, Kongunadu College of Engineering and Technology. 

FOR LATEST WORKSHOPS AND OTHER UPCOMING EVENTS CLICK HERE

LOCATION AND ROUTE MAP FOR KONGUNADU COLLEGE OF ENGINEERING AND TECHNOLOGY:

View Larger Map

TE 9223 ENVIRONMENTAL ENGINEERING AND POLLUTION CONTROL SYLLABUS | ANNA UNIVERSITY ME THERMAL ENGINEERING 2ND SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013

TE 9223 ENVIRONMENTAL ENGINEERING AND POLLUTION CONTROL SYLLABUS | ANNA UNIVERSITY ME THERMAL ENGINEERING 2ND SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E THERMAL ENGINEERING DEPARTMENT 2ND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

TE 9223 ENVIRONMENTAL ENGINEERING AND POLLUTION CONTROL L T P C
3 0 0 3
AIM:
To create awareness among the student community on anthropogenic degradation of
environment and technologies available to limit the degradation.
OBJECTIVES:
 To impart knowledge on the atmosphere and its present condition, global warming
and eco-legislations.
 To detail on the sources of air, water and noise pollution and possible solutions for
mitigating their degradation.
 To elaborate on the technologies available for generating energy from waste.
UNIT I INTRODUCTION 9
Global atmospheric change – green house effect – Ozone depletion - natural cycles -
mass and energy transfer – material balance – environmental chemistry and biology –
impacts – environmental. Legislations.
UNIT II AIR POLLUTION 9
Pollutants - sources and effect – air pollution meteorology – atmospheric dispersion –
indoor air quality - control methods and equipments - issues in air pollution control – air
sampling and measurement.
UNIT III WATER POLLUTION 9
Water resources - water pollutants - characteristics – quality - water treatment systems –
waste water treatment - treatment, utilization and disposal of sludge - monitoring
compliance with standards.
UNIT IV WASTE MANAGEMENT 9
Sources and Classification – Solid waste – Hazardous waste - Characteristics –
Collection and Transportation - Disposal – Processing and Energy Recovery – Waste
minimization.
6
UNIT V OTHER TYPES OF POLLUTION FROM INDUSTRIES 9
Noise pollution and its impact - oil pollution - pesticides - instrumentation for pollution
control - water pollution from tanneries and other industries and their control –
environment impact assessment for various projects – case studies.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. G.Masters (2003): Introduction to Environmental Engineering and Science Prentice
Hall of India Pvt Ltd, New Delhi.
2. H.S.Peavy, D.R..Rowe, G.Tchobanoglous (1985):Environmental Engineering
McGraw- Hill BookCompany, NewYork.
REFERENCES:
1 H.Ludwig, W.Evans (1991): Manual of Environmental Technology in Developing
Countries, . International Book Company, Absecon Highlands, N.J.
2. Arcadio P Sincero and G. A. Sincero, (2002): Environmental Engineering – A Design
Apporach, Prentice Hall of India Pvt Ltd, New Delhi.

TE 9222 INSTRUMENTATION FOR THERMAL SYSTEMS SYLLABUS | ANNA UNIVERSITY ME THERMAL ENGINEERING 2ND SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013

TE9222 INSTRUMENTATION FOR THERMAL SYSTEMS SYLLABUS | ANNA UNIVERSITY ME THERMAL ENGINEERING 2ND SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E THERMAL ENGINEERING DEPARTMENT 2ND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

TE 9222 INSTRUMENTATION FOR THERMAL SYSTEMS L T P C 3 0 0 3
AIM:
To enhance the knowledge of the students about various measuring instruments, techniques and importance of error and uncertainty analysis.
OBJECTIVES:
(I) To provide knowledge on various measuring instruments.
(II) To provide knowledge on advance measurement techniques.
(III) To understand the various steps involved in error analysis and uncertainty analysis.
UNIT I MEASURMENT CHARACTERISTICS 12
Instrument Classification, Characteristics of Instruments – Static and dynamic, experimental error analysis, Systematic and random errors, Statistical analysis, Uncertainty, Experimental planning and selection of measuring instruments, Reliability of instruments.
UNIT II MICROPROCESSORS AND COMPUTERS IN MEASURMENT 5
Data logging and acquisition – use of sensors for error reduction, elements of micro computer interfacing, intelligent instruments in use.
UNIT III MEASURMENT OF PHYSICAL QUANTITIES 10
Measurement of thermo-physical properties, instruments for measuring temperature, pressure and flow, use of sensors for physical variables.
UNIT IV ADVANCE MEASURMENT TECHNIQUES 8
Shadowgraph, Schlieren, Interferometer, Laser Doppler Anemometer, Hot wire Anemometer, heat flux sensors, Telemetry in measurement.
UNIT V MEASURMENT ANALYSERS 10
Orsat apparatus, Gas Analysers, Smoke meters, gas chromatography, spectrometry.
TOTAL : 45 PERIODS
TEXT BOOKS :
1. Holman, J.P., Experimental methods for engineers, McGraw-Hill, 1988.
2. Barnery, Intelligent Instrumentation, Prentice Hall of India, 1988.
3. Prebrashensky, V., Measurements and Instrumentation in Heat Engineering, Vol. 1 and 2, MIR Publishers, 1980.
REFERENCES :
1. Raman, C.S., Sharma, G.R., Mani, V.S.V., Instrumentation Devices and Systems, Tata McGraw-Hill, New Delhi, 1983.
2. Holman, J.P., Experimental methods for engineers, McGraw-Hill, 1958.
3. Barney, Intelligent Instrumentation, Prentice Hall of India, 1988
4. Prebrashensky. V., Measurement and Instrumentation in Heat Engineering, Vol.1 and MIR Publishers, 1980.
5. Raman, C.S. Sharma, G.R., Mani, V.S.V., Instrumentation Devices and Systems,
6. Tata McGraw-Hill, New Delhi, 1983.
7. Doeblin, Measurement System Application and Design, McGraw-Hill, 1978.
8. Morris. A.S, Principles of Measurements and Instrumentation Prentice Hall of India, 1998.

TE 9221 COGENERATION AND WASTE HEAT RECOVERY SYLLABUS | ANNA UNIVERSITY ME THERMAL ENGINEERING 2ND SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013

TE9221 COGENERATION AND WASTE HEAT RECOVERY SYLLABUS | ANNA UNIVERSITY ME THERMAL ENGINEERING 2ND SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E THERMAL ENGINEERING DEPARTMENT 2ND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

TE 9221 COGENERATION AND WASTE HEAT RECOVERY SYSTEMS L T PC 3 0 0 3
AIM:
To detail on the importance of Total Energy Concept, its advantages and cost effectiveness.
OBJECTIVES:
 To analyze the basic energy generation cycles
 To detail about the concept of cogeneration, its types and probable areas of applications
 To study the significance of waste heat recovery systems and carryout its economic analysis
UNIT I INTRODUCTION 9
Introduction – principles of thermodynamics – cycles – topping – bottoming – combined cycle – organic rankine cycles – performance indices of cogeneration systems – waste heat recovery – sources and types – concept of tri generation.
UNIT II CONGENERATION TECHNOLOGIES 9
Configuration and thermodynamic performance – steam turbine congeneration systems – gas turbine cogeneration systems – reciprocating IC engines cogeneration systems – combined cycles cogeneration systems – advanced cogeneration systems: fuel cell, Stirling engines etc.,
UNIT III ISSUES AND APPLICATIONS OF COGENERATION TECHNOLOGIES 9
Cogeneration plants electrical interconnection issues – utility and cogeneration plant interconnection issues – applications of cogeneration in utility sector – industrial sector – building sector – rural sector – impacts of cogeneration plants – fuel, electricity and environment.
UNIT IV WASTE HEAT RECOVERY SYSTEMS 9
Selection criteria for waste heat recovery technologies – recuperators – Regenerators – economizers – plate heat exchangers – thermic fluid heaters – Waste heat boilers – classification, location, service conditions, design Considerations – fluidized bed heat exchangers – heat pipe exchangers – heat pumps – sorption systems.
UNIT V ECONOMIC ANALYSIS 9
Investment cost – economic concepts – measures of economic performance – procedure for economic analysis – examples – procedure for optimized system selection and design – load curves – sensitivity analysis – regulatory and financial frame work for cogeneration and waste heat recovery systems.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Charles H. Butler, Cogeneration, McGraw Hill Book Co., 1984.11
2. EDUCOGEN – The European Educational tool for cogeneration, Second Edition, 2001
REFERENCES:
1. Horlock JH, Cogeneration - Heat and Power, Thermodynamics and Economics, Oxford,1987.
2. Institute of Fuel, London, Waste Heat Recovery, Chapman & Hall Publishers,London, 1963.
3. Seagate Subrata, Lee SS EDS, Waste Heat Utilization and Management, Hemisphere, Washington, 1983.
4. De Nevers, Noel., Air Pollution Control Engineering, McGrawHill, New York,1995

http://acoe.annauniv.edu/rev_result.php - Anna University Nov/Dec 2012 UG Revaluation Results Announced

http://acoe.annauniv.edu/rev_result.php - Anna University Nov/Dec 2012 UG Revaluation Results Announced 
ANNA UNIVERSITY HAS ANNOUNCED THE RESULT FOR THE CEG, AC TECH, MIT & SAP CAMPUSES UG NOV/DEC 2012 REVALUATION. THE CANDIDATES WHO APPEARED FOR THE EXAM CAN CHECK THEIR RESULT PERFORMANCES. THEY NEED TO ENTER THEIR REGISTER NUMBER IN THE FOLLOWING LINK ADDRESSES.

ANNA UNIVERSITY CEG, AC TECH, MIT & SAP CAMPUSES UG NOV/DEC 2012 REVALUATION RESULTS

FOR ANNA UNIVERSITY CEG, AC TECH, MIT & SAP CAMPUSES UG NOV/DEC 2012 REVALUATION RESULTS visit http://acoe.annauniv.edu/rev_result.php

GET ANNA UNIVERSITY NOV/DEC 2012 3RD,5TH,7TH SEM RESULTS CLICK HERE

JEPPIAAR ENGINEERING COLLEGE SYMPOSIUMS 2013 WIZARC 2013

JEPPIAAR ENGINEERING COLLEGE SYMPOSIUMS 2013 WIZARC 2013

JEPPIAAR ENGINEERING COLLEGE WIZARC 2013 CSE COMPUTER SCIENCE DEPARTMENT SYMPOSIUMS ON MARCH 13TH 2013

WIZARC 2013

DATE OF SYMPOSIUM FUNCTION : MARCH 13TH 2013

ORGANISED BY CSE COMPUTER SCIENCE DEPARTMENT

FOR LATEST SYMPOSIUMS AND OTHER UPCOMING EVENTS CLICK HERE

LIST OF EVENTS:
1.  PAPER PRESENTATION
2.  QUIZ 
3.  DEBUGGING
4.  POSTER DESIGNING
5.  wEBSITE DESIGNING
6.  DUMB C
7.  GAMMING
8.  AD-ZAP
9.  oNLINE PHOTOGRAPHY
10. SHORT FILM 
11. ONLINE EVENTS

Paper Presentation 
 LIST OF TOPICS:
1.Grid Computing
2.Cloud Computing
3.Embedded Systems
4.Data Mining and Warehousing
5.Artificial Intelligence
6.Networking
7.Virtual Reality
8.Quantum Computing
9.Mobile Computing
And Any recent trends in computer technology

PAPER PRESENTATION MAIL ID : wizarc13@gmail.com
Last date for submitting paper abstract: 8 MAR 23 2013
Intimation of selected paper: 10 MAR 2013 
Kindly visit our website www.wizarc13.com for more details regarding the events ,etc.
LOCATION AND ROUTE MAP FOR JEPPIAAR ENGINEERING COLLEGE:

View Larger Map

ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013

ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E PRODUCT DESIGN & DEVELOPMENT DEPARTMENT SECOND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

AFFILIATED INSTITUTIONS ANNA UNIVERSITY, CHENNAI REGULATIONS - 2009
II SEMESTERS (FULL TIME) CURRICULUM AND SYLLABUS
M.E. PRODUCT DESIGN & DEVELOPMENT
SEMESTER – II
CODE NO. COURSE TITLE L T P C
THEORY
ED 9221 Finite Element Methods in Mechanical Design 3 1 0 4
PD 9221 Integrated Product Design and Process Development** 3 1 0 4
PD 9222 Product and Process Engineering Tools 3 0 0 3
PD 9223 Materials for Product Design** 3 1 0 4
E3 Elective III 3 0 0 3
E4 Elective IV 3 0 0 3
PRACTICAL
PD 9224 Digital Product Development Lab-III 0 0 2 1
PD 9225 New Product Design Studio Lab 0 0 2 1
Total 18 2 4 23


COMMON ELECTIVES (M.E. – Engineering Design/Computer Aided Design/Product Design and Development)
LIST OF ELECTIVES FOR M.E. PRODUCT DESIGN AND DEVELOPMENT
COURSE CODE COURSE TITLE L T P C
THEORY

1 ED 9250 Optimization Techniques in Design 3 0 0 3
2 PD 9250 Design Paradigm 3 0 0 3
3 ED 9251 Engineering Fracture Mechanics 3 0 0 3
4 CC9221 Design for Manufacture, Assembly & Environments 3 0 0 3
5 ED 9252 Tribology in Design 3 0 0 3
6 ED 9253 Advanced Mechanics of Materials 3 0 0 3
7 ED 9254 Composite Materials and Mechanics 3 0 0 3
8 ED 9255 Applied Engineering Acoustics 3 0 0 3
9 ED 9256 Advanced Tool Design 3 0 0 3
10 ED 9257 Productivity Management and Re-Engineering 3 0 0 3
11 ED 9258 Industrial Robotics and Expert systems 3 0 0 3
12 EY 9256 Design of Heat Exchangers 3 0 0 3
13 ED 9271 Rapid Prototyping and Tooling 3 0 0 3
14 ED 9259 Design of Material Handling Equipments 3 0 0 3
15 ED 9260 Plasticity and Metal Forming 3 0 0 3
16 ED 9261 Theory of Plates and Shells 3 0 0 3
17 ED 9262 Design of Pressure Vessels and Piping 3 0 0 3
18 CI 9222 Mechatronics in Manufacturing 3 0 0 3
19 ED 9263 Modal Analysis of Mechanical Systems 3 0 0 3
20 ED 9264 Design of Hydraulic and Pneumatic systems 3 0 0 3
21 ED 9265 Experimental Stress Analysis 3 0 0 3
22 CC 9222 Integrated Manufacturing Systems 3 0 0 3
23 ED 9266 Maintenance Engineering 3 0 0 3
24 ED 9267 Bearing Design and Rotor Dynamics 3 0 0 3
25 PD 9251 Micro Electro Mechanical Systems 3 0 0 3
26 PD 9252 Creativity in Design 3 0 0 3
27 PD 9253 Reverse Engineering 3 0 0 3
28 IE 9224 Supply Chain Management 3 0 0 3
29 PD 9254 Enterprise Resource Planning 3 0 0 3
30 IC 9262 Computational Fluid Dynamics 3 0 0 3

PD 9270 Mini Project 3 0 0

UGC sponsored “Short Term Course on Research Methodology, Techniques of Writing Research Articles for SCI Journals and Ph.D Thesis Preparation” (6-7, MARCH 2013)

UGC sponsored “Short Term Course on Research Methodology, Techniques of Writing Research Articles for SCI Journals and Ph.D Thesis Preparation”  (6-7, MARCH 2013) 

Organized by Department of Geology  Anna University, Chennai-600 025

For More Explained Details Please Visit http://www.annauniv.edu/pdf/UGCGeology.pdf

THE COURSE DETAILS 

This two day course is organised with an aim to familiarize the young faculty members, research scholars, and students who are pursuing their Ph.D about research methods, review of literature, use of old and modern research tools and techniques, and improving writing and presentation skills for publishing their research findings in SCI journals. This course will include both quantitative and qualitative research methodology. This course is intended to provide knowledge to the participants on better designing of their 
primary research studies, using the right methods, tools to analysis of data. On completion of this course, they will be confident of their choice of research problem and will be able to come out with a good thesis. 

The objectives of this course are: 

Introducing research methods to the participants (both qualitative and quantitative) 
Familiarizing the participants on latest techniques of research data analysis 
Enhancing their knowledge, confidence and appropriate skills for their field of research 
Improving the capability of the participants in selection of appropriate journal for their field of research and performing qualitative research article writing 
Enhancing their skills for interpretation of results and presentation in user friendly formats 

THEMES AND TOPICS TO BE COVERED IN THIS COURSE 

Introduction to scientific research, methodology and approaches in quantitative and 
qualitative research, selection and defining of research problem, methods of data collection, tools and techniques for quantitative and qualitative data analysis, communication skills, importance of impact factors and presentation, and writing research articles for SCI journals. 

WHO CAN APPLY AND NUMBER OF PARTICIPANTS

This short term course is for faculty members, research scholars and students, who 
are registered and pursuing their Ph. D. The course will be for a maximum of 60 (only) participants. The criteria for selection of participants will be on first come first served basis and also on the current status of their research work. The selected participants will be informed through e-mail. 

LAST DATE FOR SUBMISSION OF REGISTRATION FORM: 01 MARCH, 2013

The applications with prescribed details duly signed by the Head of the institution should be sent to “The Professor and Head, Department of Geology, Anna University, Chennai-25” through post, with a copy through email to: aucgeology@gmail.com on or before 01 March, 2013. The selected participants will be informed on or before 04 MARCH, 2013.

SCAD COLLEGE OF ENGINEERING AND TECHNOLOGY SYMPOSIUMS 2013 EXODUS 2013

SCAD COLLEGE OF ENGINEERING AND TECHNOLOGY SYMPOSIUMS 2013 EXODUS 2013

SCAD COLLEGE OF ENGINEERING AND TECHNOLOGY EXODUS 2013 CSE COMPUTER SCIENCE DEPARTMENT SYMPOSIUMS ON MARCH 9TH 2013

EXODUS 2013

DATE OF SYMPOSIUM FUNCTION : MARCH 9TH 2013

ORGANISED BY CSE COMPUTER SCIENCE DEPARTMENT

LIST OF EVENTS:

• Debugging
• Quiz
• Paper Presentation
• Multimedia Presentation
• Coding
• Web Designing

FOR LIST OF EVENTS AND MORE VISIT http://www.exodus13.com/

TO REGISTER ONLINE PLEASE VISIT http://www.exodus13.com/register

FOR LATEST SYMPOSIUMS AND OTHER UPCOMING EVENTS CLICK HERE

LOCATION AND ROUTE MAP FOR SCAD COLLEGE OF ENGINEERING AND TECHNOLOGY:

View Larger Map

PD9225 NEW PRODUCT DESIGN STUDIO LAB SYLLABUS | ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013

PD9225 NEW PRODUCT DESIGN STUDIO LAB SYLLABUS | ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E PRODUCT DESIGN & DEVELOPMENT DEPARTMENT SECOND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

PD9225 NEW PRODUCT DESIGN STUDIO LAB L T P C 0 0 2 1
The students in a group have to develop digital and physical prototype models using RP machine / clay models of a new product/ existing product with enhanced feature involving the following areas :
 Automotive components
 Tool and die components
 Press tool components
 Consumer product
 Injection moulded products.
The fabricated models may be in the form of RP models,clay models,sheet metal modelsor card-board models etc… The design and development of the product will be reviewed in two stages for awarding internal marks. The end semester examination mark will be based on the demonstration of the new product developed and oral examination on the same by internal examiners.
PRACTICAL: 45 PERIODS

PD9224 DIGITAL PRODUCT DEVELOPMENT LAB - III SYLLABUS | ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013

PD9224 DIGITAL PRODUCT DEVELOPMENT LAB - III SYLLABUS | ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E PRODUCT DESIGN & DEVELOPMENT DEPARTMENT SECOND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

PD9224 DIGITAL PRODUCT DEVELOPMENT LAB - III L T P C 0 0 2 1
 CNC Machines – Features, Tooling
 CNC program simulation in FANUC/SINUMERIC systems.
 CAD/CAM connection & DNC link.
 Cutter path generation for Planar machining, Surface Machining, Cavity machining, Fixed & variable contour machining, Drilling,Turning, tool&die and mould machining
 Practical in Production CNC Machining & Turning Centres and Rapid Prototyping Machine
 Post processing & CNC code Generation for advanced machining. Exercises in tool path and NC code generation using software such as NX
TOTAL: 45 PERIODS

PD9223 MATERIALS FOR PRODUCT DESIGN SYLLABUS | ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013

PD9223 MATERIALS FOR PRODUCT DESIGN SYLLABUS | ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E PRODUCT DESIGN & DEVELOPMENT DEPARTMENT SECOND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

PD9223 MATERIALS FOR PRODUCT DESIGN** L T P C 3 1 0 4
UNIT I MATERIAL BEHAVIOR AND SELECTION 12
Elastic and Plastic deformation- Mechanism of Plastic deformation-yield stress and shear strength-Perfect and Real crystals- Effect of strain rate and temperature on plastic behaviour- Super plasticity- Deformation of non crystalline materials- Material selection- Cost and service requirement- Recycling- Selection of material for mechanical properties- Strength, toughness and fatigue- Material selection for durability and surface wear and Corrosion resistance- Functional relation between materials and processing- Manufacturing characteristics of metals- Material selection charts and other aids- material selection for aero, auto and nuclear application- Structural Product analysis-End Use behavior – Tooling in product design- Case
studies in material selection .
UNIT II PROCESS MODELING AND PRODUCT DESIGN 9
Methods of analysis- Slab, slip line and upper bound solutions- Numerical methods- Effect of Friction- Contact problem- Basic analysis of process- Forging, Drawing and sheet metal forming- machining- Turning- modern materials- micro alloyed and dual phase steel- High strength low alloy metals- Smart materials- Shape memory metals- Metallic Glasses- Nano Materials- Metal foams- Properties and applications for
product design.
UNIT III NON METALS AND MANUFACTURING 9
General properties and its importance of polymers- Thermal and electrical propertiesmechanical properties- Criteria for selection- Composite materials- fibers- Boron, glass, carbon, organic- Ceramic and metallic fibres- - Matrix materials- Polymer, metal and ceramics- properties and applications- Manufacturing methods of plastic products-Injection and blow moulding –Rotational mouding-Compression moulding-
Transfer moulding- layering of composites
UNIT IV PRODUCT DESIGN AND ASSEMBLY REQUIREMENTS 8
Structural product analysis- End use behaviour- Effect of tooling in product design- Design for joining and assembling- Design for live hinges- Snap fits, design of corners, bushes and ribs- Design considerations- New product design-Methods of decoration- Bonding and cementing techniques- Thermal bonding- Machining of plastics- Parameters and effect- Case studies in material selection with relevance to
product design and development
UNIT V DEVELOPMENT IN MATERIALS PROCESSING 7
Micro fabrication technologies- Tool for micro fabrication- Diamond and high speed machining- LIGA micro fabrication process- Multilayer X-ray lithography- Wire bonding packaging- Etching- Wet and dry etching techniques- Typical application
TOTAL 45 + 15 = 60 PERIODS
** a Term Project must be given for Assessment – 3 (Compulsory)
TEXT BOOK
1. Serope Kalpakjian and Schmid- Manufacturing process for Engineering materials Pearson- 2005.
REFERENCES
1. Paul Degarmo, Black and Kohsher- Materials and processes in Manufacturing- Wiley Student Edition- 9th Edition- 2005
2. Sami Franssile- Introduction to Micro Fabrication- John Wiley and Sons- UK 2004
3. Harfold Belofsky- Plastic design and processing hand book, Hanser publication- 2005
4. Beck- Plastic Product Design- van Nostrand Reignhold 2nd Edition
5. Asbhay, Selection of Materials, El Sevier Publications, 2006

PD9222 PRODUCT AND PROCESS ENGINEERING TOOLS SYLLABUS | ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT ELECTIVES SYLLABUS REGULATION 2009 2011 2012-2013

PD9222 PRODUCT AND PROCESS ENGINEERING TOOLS SYLLABUS | ANNA UNIVERSITY ME PRODUCT DESIGN & DEVELOPMENT 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E PRODUCT DESIGN & DEVELOPMENT DEPARTMENT SECOND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

PD9222 PRODUCT AND PROCESS ENGINEERING TOOLS L T P C 3 0 0 3
OBJECTIVES
To study about the tools required for various design activities, improvement methodologies and quality control charts and other standards.
UNIT I TOOLS FOR CONCEPT DEVELOPMENT 9
Products division, Quality function Deployment, concept engineering –Tools for Design Development: design failure mode and design analysis, Reliability prediction- Tools for Design Optimization: The Taguchi Loss Function, Optimizing Reliability- Tools for Design Verification: Reliability Testing,.
UNIT II TOOLS FOR PROCESS IMPROVEMENT 9
Process improvement methodologies, The Deming Cycle-FADE-Basic tools for process improvement: flow charts, run charts and control charts, check sheets, histograms, Pareto diagrams, Cause and Effect Diagrams-Scatter Diagrams-Other tools for process improvement: Kaizen Blitz, Poka-yoke (mistake proofing), process simulation-Engaging the work force in process improvement.
UNIT III STATISTICAL PROCESS CONTROL 9
Quality control measurements-SPC Methodology-Process capacity evaluation- Control charts for variables data-Special Control charts for variables data- Process Capability Evaluation- Control Charts for Attributes- Summary of control charts construction chart, np-charts,c & u charts –Designing control charts: sampling , size, 6 frequency-SPC,ISO 9000:2000, AND SIX SIGMA-Pre control- Measurement system
Evaluation. 
UNIT IV BENCHMARKING AND ESTABLISHING ENGINEERING SPECIFICATIONS 9
A Benchmarking Approach – Support tools for the benchmarking process: intended assembly cost analysis, form diagram, trend analysis- Setting product specifications: Basic & Advanced method.
UNIT V PROJECT MANAGEMENT 9
Understanding and representing tasks: Tasks, charts- Baseline project planning – Accelerating projects-project execution- Postmortem execution. 
TOTAL : 45 PERIODS
TEXT BOOK:
1. Product Design & Development, KARL T. ULRICH, STEVEN D. EPPINGER, TATA McGRAW-HILL- 3rd Edition, 2003
REFERENCES:
1. Product Design Techniques in Reverse Engineering and New Product Development, KEVIN OTTO & KRISTIN WOOD, Pearson Education (LPE), 2001.
2. The Management and control of Quality-6th edition-James R. Evens, William M Lindsay Pub:son south-western(www.swlearning.com) 

ANNA UNIVERSITY ME MANUFACTURING ENGINEERING 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013

ANNA UNIVERSITY ME MANUFACTURING ENGINEERING 2nd SEMESTER SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E MANUFACTURING ENGINEERING DEPARTMENT 2ND SEMESTER SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI, TRICHY, MADURAI, TIRUNELVELI, COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010

AFFILIATED INSTITUTIONS ANNA UNIVERSITY : : CHENNAI 600 025 REGULATIONS -2009
II SEMESTERS (FULL TIME) CURRICULUM AND SYLLABUS M.E. MANUFACTURING ENGINEERING SEMESTER II
SL.No COURSE CODE COURSE TITLE L T P C
THEORY
1 MF9221 Robot Design & Programming 3 0 0 3
2 MF9222 Manufacturing Metrology and Quality Control 3 0 0 3
3 MF9223 Metal Forming Processes 3 0 0 3
4 MF9224 MEMS & Nanotechnology 3 0 0 3
5 E3 Elective III 3 0 0 3
6 E4 Elective IV 3 0 0 3
PRACTICAL
7 MF9225 Automation Lab 0 0 4 2
TOTAL 18 0 4 20


ELECTIVES FOR M.E.MANUFACTURING ENGINEERING
COURSE
CODE COURSE TITLE L T P C
MF9250 Finite Element Application in Manufacturing 3 0 0 3
MF9251 Fluid Power Automation 3 0 0 3
MF9252 Design for Manufacture and Assembly 3 0 0 3
MF9253 Materials Management & Logistics 3 0 0 3
MF9254 Advances in Casting and Welding Processes 3 0 0 3
MF9255 Metal Cutting Theory and Practice 3 0 0 3
MF9256 Probability & Statistics 3 0 0 3
MF9257 Manufacturing System Simulation 3 0 0 3
MF9258 Optimization Techniques in Engineering 3 0 0 3
MF9259 Industrial Ergonomics 3 0 0 3
MF9260 Polymers and Composite Materials 3 0 0 3
MF9261 Non-Destructive Evaluation 3 0 0 3
MF9262 Artificial Intelligence 3 0 0 3
MF9263 Lean Manufacturing system and Implementation 3 0 0 3
MF9264 Quality & Reliability Engineering 3 0 0 3
MF9265 Computer Aided Product Design 3 0 0 3
MF9266 Financial management 3 0 0 3
MF9267 Rapid Manufacturing 3 0 0 3
MF9268 Manufacturing Management 3 0 0 3

M.N.M JAIN ENGINEERING COLLEGE SYMPOSIUMS 2013 ELEXRIEG 2013

M.N.M JAIN ENGINEERING COLLEGE SYMPOSIUMS 2013 ELEXRIEG 2013

M.N.M JAIN ENGINEERING COLLEGE ELEXRIEG 2013 ECE ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT SYMPOSIUMS ON MARCH 2ND 2013

ELEXRIEG 2013

DATE OF SYMPOSIUM FUNCTION : MARCH 2ND 2013

ORGANISED BY ECE ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT

LIST OF EVENTS:

FOR LIST OF EVENTS AND MORE VISIT http://www.elexrieg.com/

TO REGISTER ONLINE PLEASE VISIT http://www.elexrieg.com/Reg/index.html

FOR LATEST SYMPOSIUMS AND OTHER UPCOMING EVENTS CLICK HERE

LOCATION AND ROUTE MAP FOR M.N.M JAIN ENGINEERING COLLEGE:

View Larger Map

TANCET 2013 Registration Date Extended - Details here - www.annauniv.edu

TANCET 2013 Registration Date Extended - Details here

The Tamilnadu Common Entrance Test (TANCET) 2013 is scheduled on 6.4.2013 and 7.4.2013. The Registration in Person and issue of Hall Tickets at the Co-ordinating Centres viz. 

• Coimbatore
• Chidambaram
• Dindigul
• Erode
• Karaikudi
• Madurai
• Nagercoil
• Salem 
• Thanjavur
• Tirunelveli
• Tiruchirappalli
•  Vellore
• Villupuram
• Virudhunagar is extended till 28.02.2013, 5.30 p.m. 

and in Chennai upto 2.3.2013.

www.annauniv.edu TANCET 2013 Last Date for Registration

TANCET 2013 Last Date for Registration

Dear Students, I hope you all know well about the TANCET 2013 Exam which conducted by Anna University Chennai for the Admissions into its affiliated Institutions.

We already posted the registration details, Important dates, Tancet Exam Tips, etc., and ,many more tancet related articles.

This is article is to remind the students those who have the idea for doing PG courses. Tancet 2013 registration already started on 6th feb 2013.

Only two days are left to register for TANCET 2013.  As per the official Information 26th Feb 2012 is the last date for registration through coordinating centres and internet. If you miss this opportunity you can register only in the chennai centre, for that the Last date is 28th February 2013.

Please share this useful information to your friends. Please give plus 1 to get latest updates 

Coimbatore institute of engineering and technology ciet symposiums 2013 esperanto 2013

Coimbatore institute of engineering and technology ciet symposiums 2013 esperanto 2013

Coimbatore institute of engineering and technology ciet esperanto 2013 information technology department symposiums on march 5th 2013

Esperanto 2012

Date of symposium function : march 5th 2013

Organised by Information Technology department

List of events:

1. Paper Presentation
2. Project Presentation
3. Poster Presentation
4. Multimedia Presentation
5. Technical Quiz
6. Best Manager
7. Coding
8. Googler
9. Games

For list of events and more visit http://www.esperanto13.info/

To register online please visit http://www.esperanto13.info/Karthick/index.php#!/page_Register

Location and route map for Coimbatore Institute Of Engineering And Technology ciet:

View Larger Map

P.B.COLLEGE OF ENGINEERING SYMPOSIUMS 2013 ASTHRA 2013

P.B.COLLEGE OF ENGINEERING SYMPOSIUMS 2013 ASTHRA 2013

P.B.COLLEGE OF ENGINEERING ASTHRA 2013 AERONAUTICAL ENGINEERING DEPARTMENT SYMPOSIUMS ON FEBRUARY 27TH 2013

ASTHRA 2012

DATE OF SYMPOSIUM FUNCTION : FEBRUARY 27TH 2013

ORGANISED BY AERONAUTICAL ENGINEERING DEPARTMENT

LIST OF EVENTS:

1. PAPER PRESENTATION
2. BOTTLE ROCKETRY
3. TECH QUIZ
4. R/C HOVERCRAFT
5. GLIDER PLANE
6. PAPER PLANE
7. PARA GLIDE
8. BOOMERANG
9. FUN EVENTS
10. FEAR FACTOR

FOR LIST OF EVENTS AND MORE VISIT www.asthra13.co.nr

TO REGISTER ONLINE PLEASE VISIT www.asthra13.co.nr

LOCATION AND ROUTE MAP FOR P.B.COLLEGE OF ENGINEERING:

View Larger Map