CI 9253 CORROSION AND SURFACE ENGINEERING SYLLABUS | ANNA UNIVERSITY ME COMPUTER INTEGRATED MANUFACTURING ELECTIVES SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY M.E COMPUTER INTEGRATED MANUFACTURING DEPARTMENT ELECTIVES SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2010
CI 9253 CORROSION AND SURFACE ENGINEERING L T P C
3 0 0 3
AIM:
To impart knowledge on the corrosion and surface problems in Engineering practices.
OBJECTIVES:
To impart knowledge on the scientific principles and methods that underlie the
cause, detection, measurement and prevention of corrosion problems in
engineering practices.
To impart knowledge on the hands-on approaches for matching surface
treatmentswith design and performance requirements.
UNIT I MECHANISMS AND TYPES OF CORROSION 9
Principles of Corrosion – classification of corrosion – form of corrosion, general,
localized, metallurgical influenced, mechanically assisted, environmentally induced
corrosions - Factors influencing corrosion- corrosion damage – corrosion cost.
UNIT II TESTING AND PREVENTION OF CORROSION 9
Planning and preparation of corrosion tests – In-service monitoring, simulated service,
laboratory testing – Evaluation of corrosion - Prevention of Corrosion, suitable
designing and modifications of corrosive environment, corrosion inhibitors -Cathodic
Protection - Anodic protection - Protective surface coatings.
11
UNIT III CORROSION BEHAVIOR OF MATERIALS 9
Selection of material for various corrosive environments - Corrosion of Steels,
Stainless Steel, Aluminum alloys, Copper alloys, Nickel and Titanium alloys –
Corrosion of Polymers, Ceramics and Composite materials.
UNIT IV SURFACE COATINGS 9
Solid surface significance ,surface properties, superficial layer – changing surface
metallurgy, chemistry and adding a surface layer or coating - Diffusion coatings-
Electro and Electro less Plating-Hot dip coating-Hard facing-Metal spraying, Plasma
Spraying-Ceramics-APS, VPS, CCAPS – Flames and Arc processes – Conversion
coating.
UNIT V THIN LAYER ENGINEERING PROCESSES: 9
Laser and Electron Beam hardening- Thermal evaporation, Arc Vaporization,
Sputtering, Ion plating- Vapor deposition processes, Implantation technique –
Coating of tools, TiC, TiN, Al2O3 and Diamond coating – Properties and applications
of thin coatings.
TOTAL : 45 PERIODS
TEXT BOOKS:
1. Fontana G., “Corrosion Engineering”, McGraw Hill, 1985
2. Kenneth G.Budinski, “Surface Engineering for Wear Resistance”, Prentice Hall,
1988.
REFERENCES:
1. Schweitzer.P.A.”Corrosion Engineering Hand Book”, 3rd Edition, Marcel Decker,
2. 1996.
3. Winston Review, R. Uhlig, Corrosion, Hand Book 2nd Edition, John Wiley ,2000.
4. T.Burakowski and T.Wierzchon, “Surface Engineering of Metals”, CRC
press,1999
5. ASM Metals Hand Book – Volume 13 , Corrosion, 1999
6. ASM Metals Hand book – Volume 5, Surface Engineering, 1999.
CI 9253 CORROSION AND SURFACE ENGINEERING L T P C
3 0 0 3
AIM:
To impart knowledge on the corrosion and surface problems in Engineering practices.
OBJECTIVES:
To impart knowledge on the scientific principles and methods that underlie the
cause, detection, measurement and prevention of corrosion problems in
engineering practices.
To impart knowledge on the hands-on approaches for matching surface
treatmentswith design and performance requirements.
UNIT I MECHANISMS AND TYPES OF CORROSION 9
Principles of Corrosion – classification of corrosion – form of corrosion, general,
localized, metallurgical influenced, mechanically assisted, environmentally induced
corrosions - Factors influencing corrosion- corrosion damage – corrosion cost.
UNIT II TESTING AND PREVENTION OF CORROSION 9
Planning and preparation of corrosion tests – In-service monitoring, simulated service,
laboratory testing – Evaluation of corrosion - Prevention of Corrosion, suitable
designing and modifications of corrosive environment, corrosion inhibitors -Cathodic
Protection - Anodic protection - Protective surface coatings.
11
UNIT III CORROSION BEHAVIOR OF MATERIALS 9
Selection of material for various corrosive environments - Corrosion of Steels,
Stainless Steel, Aluminum alloys, Copper alloys, Nickel and Titanium alloys –
Corrosion of Polymers, Ceramics and Composite materials.
UNIT IV SURFACE COATINGS 9
Solid surface significance ,surface properties, superficial layer – changing surface
metallurgy, chemistry and adding a surface layer or coating - Diffusion coatings-
Electro and Electro less Plating-Hot dip coating-Hard facing-Metal spraying, Plasma
Spraying-Ceramics-APS, VPS, CCAPS – Flames and Arc processes – Conversion
coating.
UNIT V THIN LAYER ENGINEERING PROCESSES: 9
Laser and Electron Beam hardening- Thermal evaporation, Arc Vaporization,
Sputtering, Ion plating- Vapor deposition processes, Implantation technique –
Coating of tools, TiC, TiN, Al2O3 and Diamond coating – Properties and applications
of thin coatings.
TOTAL : 45 PERIODS
TEXT BOOKS:
1. Fontana G., “Corrosion Engineering”, McGraw Hill, 1985
2. Kenneth G.Budinski, “Surface Engineering for Wear Resistance”, Prentice Hall,
1988.
REFERENCES:
1. Schweitzer.P.A.”Corrosion Engineering Hand Book”, 3rd Edition, Marcel Decker,
2. 1996.
3. Winston Review, R. Uhlig, Corrosion, Hand Book 2nd Edition, John Wiley ,2000.
4. T.Burakowski and T.Wierzchon, “Surface Engineering of Metals”, CRC
press,1999
5. ASM Metals Hand Book – Volume 13 , Corrosion, 1999
6. ASM Metals Hand book – Volume 5, Surface Engineering, 1999.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...