AN3006 ADVANCED STRENGTH OF MATERIALS SYLLABUS | ANNA UNIVERSITY BE MECHANICAL AND AUTOMATION ENGINEERING 8TH SEMESTER SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY 8TH SEMESTER B.E MECHANICAL AND AUTOMATION ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI, TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
AN3006 ADVANCED STRENGTH OF MATERIALS L T P C
3 0 0 3
OBJECTIVE
To analyse the stresses and deformations through advanced mathematical models.
To estimate the design strength of various industrial equipments.
UNIT I ANALYSIS OF PLATES 8
Mathematical modeling of plates with normal loads – Point and Distributed Loads – Support
conditions – Rectangular plates - Stresses along coordinate axes – Plate deformations – Axisymmetric
plates – Radial and tangential stresses – plate deflections.
77
UNIT II THICK CYLINDERS AND SPHERES 10
Equilibrium and compatibility conditions - Lame’s Theorem – Boundary conditions – distribution of
radial and tangential stresses – compound cylinders – Interference fits - Stresses due to
temperature distributions.
UNIT III ROTATING DISCS 10
Lame-Clayperon Theorem – radial and tangential stresses in discs due to centrifugal effects –
boundary conditions – solid and hollow discs – Interference fit on shafts –Strengthening of the hub –
residual stresses – Autofrettege – Discs of variable thickness – Disc profile for uniform strength.
UNIT IV BEAMS ON ELASTIC FOUNDATION 8
Infinite beam subjected to concentrated load – Boundary Conditions – Infinite beam subjected to a
distributed load segment – Triangular load – Semi infinite beam subjected to loads at the ends and
concentrated load near the ends – Short beams.
UNIT V CURVED BEAMS AND CONTACT STRESSES 9
Analysis of stresses in beams with large curvature – Stress distribution in curved beams – Stresses
in crane hooks and C clamps – Contact Stresses – Hertz equation for contact stresses –
applications to rolling contact elements.
TOTAL : 45 PERIODS
TEXT BOOKS:
1. Boresi A.P., Schmidt R.J., “Advanced Mechanics of Materials”, John Wiley and Sons, Sixth
edition, 2003.
2. Dally J.W. and Riley W.F, “Experimental Stress Analysis”, John Wiley and Sons 2003
REFERENCES
1. Burr A. H., CheathAm J.B., “Mechanical Analysis and Design”, Prentice Hall of India, Second\
edition, 2001.
2. Den-Hartog J.P., “Strength of Materials”, John Wiley and Sons.
AN3006 ADVANCED STRENGTH OF MATERIALS L T P C
3 0 0 3
OBJECTIVE
To analyse the stresses and deformations through advanced mathematical models.
To estimate the design strength of various industrial equipments.
UNIT I ANALYSIS OF PLATES 8
Mathematical modeling of plates with normal loads – Point and Distributed Loads – Support
conditions – Rectangular plates - Stresses along coordinate axes – Plate deformations – Axisymmetric
plates – Radial and tangential stresses – plate deflections.
77
UNIT II THICK CYLINDERS AND SPHERES 10
Equilibrium and compatibility conditions - Lame’s Theorem – Boundary conditions – distribution of
radial and tangential stresses – compound cylinders – Interference fits - Stresses due to
temperature distributions.
UNIT III ROTATING DISCS 10
Lame-Clayperon Theorem – radial and tangential stresses in discs due to centrifugal effects –
boundary conditions – solid and hollow discs – Interference fit on shafts –Strengthening of the hub –
residual stresses – Autofrettege – Discs of variable thickness – Disc profile for uniform strength.
UNIT IV BEAMS ON ELASTIC FOUNDATION 8
Infinite beam subjected to concentrated load – Boundary Conditions – Infinite beam subjected to a
distributed load segment – Triangular load – Semi infinite beam subjected to loads at the ends and
concentrated load near the ends – Short beams.
UNIT V CURVED BEAMS AND CONTACT STRESSES 9
Analysis of stresses in beams with large curvature – Stress distribution in curved beams – Stresses
in crane hooks and C clamps – Contact Stresses – Hertz equation for contact stresses –
applications to rolling contact elements.
TOTAL : 45 PERIODS
TEXT BOOKS:
1. Boresi A.P., Schmidt R.J., “Advanced Mechanics of Materials”, John Wiley and Sons, Sixth
edition, 2003.
2. Dally J.W. and Riley W.F, “Experimental Stress Analysis”, John Wiley and Sons 2003
REFERENCES
1. Burr A. H., CheathAm J.B., “Mechanical Analysis and Design”, Prentice Hall of India, Second\
edition, 2001.
2. Den-Hartog J.P., “Strength of Materials”, John Wiley and Sons.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...