PR2354 DESIGN OF JIGS, FIXTURE AND PRESS TOOLS & DRAWING SYLLABUS | ANNA UNIVERSITY BE PRODUCTION ENGINEERING 6TH SEMESTER SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY SIXTH SEMESTER B.E PRODUCTION ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI, TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
PR2354 DESIGN OF JIGS, FIXTURE AND PRESS TOOLS & DRAWING L T P C
3 1 0 4
OBJECTIVE:
„h To introduce the concepts of various types of jigs, fixtures and dies
„h To design and draw jig / fixture/ die for a given component
UNIT I LOCATION AND CLAMPING DEVICES IN JIGS AND FIXUTRES 9+3
Principles of Jigs and Fixture ¡V Design concepts ¡V Different types of locating devices ¡V
different types of clamps ¡V Drill bushes ¡V types ¡V Elements of fixtures.
UNIT II DESIGN OF ELEMENTS OF JIGS AND FIXTURE 9+3
Design concepts of Template Jig, Plate Jig, Sandwich Jig, Vice Jaw Jig, Latch Jig,
Turnover jig, Box jig ¡V Fixtures for Milling, Grinding, Turning, Welding, and Assembly ¡V
Modular fixtures.
UNIT III PRESS WORKING OPERATION AND FORMING DIES 9+3
Blanking, Piercing, lancing, notching, bending design features of dies for drawing,
extrusion, wire drawing and forging.
UNIT IV ELEMENTS OF DIE 9+3
Design concepts of the following elements of progressive, compound and
Combination dies ¡V Die block ¡V Die shoe ¡V Bolster plate ¡V punch ¡V punch plate ¡V punch
holder ¡V guide pins and guide bushes ¡V strippers ¡V knockouts ¡V stops - pilots ¡V selection
of standard die sets ¡V strip layout and development.
55
UNIT V DESIGN AND DRAWING DIES, JIGS AND FIXTURES 9+3
Progressive die ¡V compound die ¡V Bending and drawing dies ¡V Drill Jigs ¡V Milling fixtures,
turning fixtures.
TOTAL: 60 PERIODS
TEXT BOOKS:
1. Donaldson, B.H. Lecain, Goold V.V., Tool Design, TMH Edition, 1978.
2. Kempster M.H.A., Introduction to Jigs and Fixtures, ELBS Edition, 1976
REFERENCES:
1. Handbook of metal forming, Kurt Lunge, McGraw Hill, Pub.Co. 1985.
2. Paquin, Die Design Fundamentals, Industrial Press Inc, New York, 1979
3. ASTME, Fundamentals of Tool design, Prentice Hall 1974
PR2354 DESIGN OF JIGS, FIXTURE AND PRESS TOOLS & DRAWING L T P C
3 1 0 4
OBJECTIVE:
„h To introduce the concepts of various types of jigs, fixtures and dies
„h To design and draw jig / fixture/ die for a given component
UNIT I LOCATION AND CLAMPING DEVICES IN JIGS AND FIXUTRES 9+3
Principles of Jigs and Fixture ¡V Design concepts ¡V Different types of locating devices ¡V
different types of clamps ¡V Drill bushes ¡V types ¡V Elements of fixtures.
UNIT II DESIGN OF ELEMENTS OF JIGS AND FIXTURE 9+3
Design concepts of Template Jig, Plate Jig, Sandwich Jig, Vice Jaw Jig, Latch Jig,
Turnover jig, Box jig ¡V Fixtures for Milling, Grinding, Turning, Welding, and Assembly ¡V
Modular fixtures.
UNIT III PRESS WORKING OPERATION AND FORMING DIES 9+3
Blanking, Piercing, lancing, notching, bending design features of dies for drawing,
extrusion, wire drawing and forging.
UNIT IV ELEMENTS OF DIE 9+3
Design concepts of the following elements of progressive, compound and
Combination dies ¡V Die block ¡V Die shoe ¡V Bolster plate ¡V punch ¡V punch plate ¡V punch
holder ¡V guide pins and guide bushes ¡V strippers ¡V knockouts ¡V stops - pilots ¡V selection
of standard die sets ¡V strip layout and development.
55
UNIT V DESIGN AND DRAWING DIES, JIGS AND FIXTURES 9+3
Progressive die ¡V compound die ¡V Bending and drawing dies ¡V Drill Jigs ¡V Milling fixtures,
turning fixtures.
TOTAL: 60 PERIODS
TEXT BOOKS:
1. Donaldson, B.H. Lecain, Goold V.V., Tool Design, TMH Edition, 1978.
2. Kempster M.H.A., Introduction to Jigs and Fixtures, ELBS Edition, 1976
REFERENCES:
1. Handbook of metal forming, Kurt Lunge, McGraw Hill, Pub.Co. 1985.
2. Paquin, Die Design Fundamentals, Industrial Press Inc, New York, 1979
3. ASTME, Fundamentals of Tool design, Prentice Hall 1974
No comments:
Post a Comment
Any doubt ??? Just throw it Here...