CN 9264 ENERGY-EFFICIENT BUILDINGS SYLLABUS | ANNA UNIVERSITY ME CONSTRUCTION ENGINEERING AND MANAGEMENT 1ST SEM SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY FIRST SEMESTER ME CONSTRUCTION ENGINEERING AND MANAGEMENT DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
CN 9264 ENERGY-EFFICIENT BUILDINGS L T P C
3 0 0 3
OBJECTIVE:
To study the design of energy efficient buildings which balances all aspects of energy,
lighting, space conditioning and ventilation by providing a mix of passive solar design
strategies and to learn the use of materials with low embodied energy.
UNIT I INTRODUCTION 9
Energy required for building construction - Heat Transfer – Measuring Conduction –
Thermal Storage – Measurement of Radiation – The Green house Effect – Psychrometry
Chart – Measuring latent and sensible heat. Thermal Comfort – Site Planning and
Development – Temperature – Humidity – Wind – Optimum Site Locations – Sun
Protection – Types of Shading Devices – Conservation – Heating and Cooling loads.
UNIT II PASSIVE SOLAR HEATING AND COOLING 9
General Principles of passive Solar Heating – Key Design Elements - Direct gain
Trombe Walls, Water Walls, Convective Air loops – Concepts – Case Studies – General
Principles of Passive Cooling – Ventilation – Predicting ventilation in buildings – window
ventilation calculations - Radiation – Evaporation and dehumidification – Mass Effect –
Load Control – Air Filtration and odor removal – Heat Recovery in large buildings
UNIT III DAYLIGHTING AND ELECTRICAL LIGHTING 9
Materials, components and details - Insulation – Optical materials – Radiant Barriers
Glazing materials - Daylighting – Sources and concepts – Building Design Strategies –
Case Studies – Electric Lighting –Light Distribution – Electric Lighting control for
daylighted buildings – Illumination requirement – Components of Daylight factor –
Recommended Daylight factors – Daylighting analysis – Supplementary Artificial
Lighting Design
UNIT IV HEAT CONTROL AND VENTILATION 9
Requirements – Heat transmission through building sections – Thermal performance of
Building sections – Orientation of buildings – Building characteristics for various climates
– Thermal Design of buildings Influence of Design Parameters – Mechanical controls –
Examples. Ventilation – Requirements – Minimum standards for ventilation – Ventilation
Design – Energy Conservation in Ventilating systems – Design for Natural Ventilation.
UNIT V DESIGN FOR CLIMATIC ZONES 9
Energy efficiency – an overview of design concepts and architectural interventions –
Energy efficient buildings for various zones – cold and cloudy – cold and sunny –
composite – hot and dry – moderate – warm and humid – case studies of residences,
office buildings and other buildings in each zones – Energy Audit - Certification
TOTAL : 45 PERIODS
REFERENCES:
1. Moore, F., Environmental Control System, McGraw Hill Inc. 2002
2. Brown, G.Z. and DeKay, M., Sun, Wind and Light – Architectural Design Strategies,
John Wiley and Sons Inc, 2001
3. Chilogioji, M.H., and Oura, E.N., Energy Conservation in Commercial and
Residential Buildings - Marcel Dekker Inc., New York and Basel, 1995.
4. Cook, J., Award-winning Passive Solar Designs, McGraw Hill Book Company, 1984
5. Dubin, F.S. and Long, C.G., Energy Conservation Standards – For Building Design,
Construction and Operation - McGraw Hill Book Company 1990.
6. Majumdar, M. (Ed), Energy – efficient Buildings in India, Tata Energy Research
Institute, Ministry of Non Conventional Energy Sources, 2002.
7. Tyagi, A. K.(Ed), Handbook on energy audits and management Tata Energy
Research Institute, 2000.
8. Handbook on Functional Requirements of Buildings Part 1 to 4 SP: 41 (S and
T) -1995
9. Energy Conservation Building Code, Bureau of Energy Efficiency, New Delhi, 2007.
CN 9264 ENERGY-EFFICIENT BUILDINGS L T P C
3 0 0 3
OBJECTIVE:
To study the design of energy efficient buildings which balances all aspects of energy,
lighting, space conditioning and ventilation by providing a mix of passive solar design
strategies and to learn the use of materials with low embodied energy.
UNIT I INTRODUCTION 9
Energy required for building construction - Heat Transfer – Measuring Conduction –
Thermal Storage – Measurement of Radiation – The Green house Effect – Psychrometry
Chart – Measuring latent and sensible heat. Thermal Comfort – Site Planning and
Development – Temperature – Humidity – Wind – Optimum Site Locations – Sun
Protection – Types of Shading Devices – Conservation – Heating and Cooling loads.
UNIT II PASSIVE SOLAR HEATING AND COOLING 9
General Principles of passive Solar Heating – Key Design Elements - Direct gain
Trombe Walls, Water Walls, Convective Air loops – Concepts – Case Studies – General
Principles of Passive Cooling – Ventilation – Predicting ventilation in buildings – window
ventilation calculations - Radiation – Evaporation and dehumidification – Mass Effect –
Load Control – Air Filtration and odor removal – Heat Recovery in large buildings
UNIT III DAYLIGHTING AND ELECTRICAL LIGHTING 9
Materials, components and details - Insulation – Optical materials – Radiant Barriers
Glazing materials - Daylighting – Sources and concepts – Building Design Strategies –
Case Studies – Electric Lighting –Light Distribution – Electric Lighting control for
daylighted buildings – Illumination requirement – Components of Daylight factor –
Recommended Daylight factors – Daylighting analysis – Supplementary Artificial
Lighting Design
UNIT IV HEAT CONTROL AND VENTILATION 9
Requirements – Heat transmission through building sections – Thermal performance of
Building sections – Orientation of buildings – Building characteristics for various climates
– Thermal Design of buildings Influence of Design Parameters – Mechanical controls –
Examples. Ventilation – Requirements – Minimum standards for ventilation – Ventilation
Design – Energy Conservation in Ventilating systems – Design for Natural Ventilation.
UNIT V DESIGN FOR CLIMATIC ZONES 9
Energy efficiency – an overview of design concepts and architectural interventions –
Energy efficient buildings for various zones – cold and cloudy – cold and sunny –
composite – hot and dry – moderate – warm and humid – case studies of residences,
office buildings and other buildings in each zones – Energy Audit - Certification
TOTAL : 45 PERIODS
REFERENCES:
1. Moore, F., Environmental Control System, McGraw Hill Inc. 2002
2. Brown, G.Z. and DeKay, M., Sun, Wind and Light – Architectural Design Strategies,
John Wiley and Sons Inc, 2001
3. Chilogioji, M.H., and Oura, E.N., Energy Conservation in Commercial and
Residential Buildings - Marcel Dekker Inc., New York and Basel, 1995.
4. Cook, J., Award-winning Passive Solar Designs, McGraw Hill Book Company, 1984
5. Dubin, F.S. and Long, C.G., Energy Conservation Standards – For Building Design,
Construction and Operation - McGraw Hill Book Company 1990.
6. Majumdar, M. (Ed), Energy – efficient Buildings in India, Tata Energy Research
Institute, Ministry of Non Conventional Energy Sources, 2002.
7. Tyagi, A. K.(Ed), Handbook on energy audits and management Tata Energy
Research Institute, 2000.
8. Handbook on Functional Requirements of Buildings Part 1 to 4 SP: 41 (S and
T) -1995
9. Energy Conservation Building Code, Bureau of Energy Efficiency, New Delhi, 2007.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...