CH2307 TECHNICAL ANALYSIS LAB SYLLABUS | ANNA UNIVERSITY B.TECH. CHEMICAL ENGINEERING 5TH SEMESTER SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY FIFTH SEMESTER B.TECH. CHEMICAL ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS, IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
CH2307 TECHNICAL ANALYSIS LAB L T P C
0 0 3 2
AIM
To determine experimentally the various elements and compounds used in chemical
engineering
OBJECTIVES
To have a thorough understanding on the estimation and analysis of chemical
compounds.
LIST OF EXPERIMENTS
1. Ore Analysis
Estimation of manganese in pyrolusite ore.
Estimation of magnesium in dolomite.
2. Analysis of alloys .
3. Analysis of fertilizer.
Estimation of nitrogen in urea by kjeldal method.
4. Sugar Analysis .
5. Estimation of phenol by Iodimetry / UV-Vis Spectrometer.
6. Water Analysis
Determination of total residual chlorine in water.
Determination of chemical oxygen demand.
Determination of dissolved oxygen.
7. Polymer analysis .
8. Conductometric Titration.
9. Potentiometry.
Estimation of iron.
Determination of standard – electrode potential of Zn , Fe , Copper.
10. Estimation of sodium and potassium by flame photometry.
11. Gravimetric analysis
Estimation of barium in barium sulphate.
Estimation of nickel as DMG.
12. pH metry (acid – basic titration ) – not basic.
* Minimum 10 experiments shall be offered TOTAL : 45 PERIODS
INSTRUMENTS REQUIRED
1. UV/Vis Spectrophotometer
2. Colorimeter
3. pH meter
4. Flame photometer
5. Conductivity meter
6. Glass electrodes
7. Kjeldal’s apparatus
8. Potentiometer
CH2307 TECHNICAL ANALYSIS LAB L T P C
0 0 3 2
AIM
To determine experimentally the various elements and compounds used in chemical
engineering
OBJECTIVES
To have a thorough understanding on the estimation and analysis of chemical
compounds.
LIST OF EXPERIMENTS
1. Ore Analysis
Estimation of manganese in pyrolusite ore.
Estimation of magnesium in dolomite.
2. Analysis of alloys .
3. Analysis of fertilizer.
Estimation of nitrogen in urea by kjeldal method.
4. Sugar Analysis .
5. Estimation of phenol by Iodimetry / UV-Vis Spectrometer.
6. Water Analysis
Determination of total residual chlorine in water.
Determination of chemical oxygen demand.
Determination of dissolved oxygen.
7. Polymer analysis .
8. Conductometric Titration.
9. Potentiometry.
Estimation of iron.
Determination of standard – electrode potential of Zn , Fe , Copper.
10. Estimation of sodium and potassium by flame photometry.
11. Gravimetric analysis
Estimation of barium in barium sulphate.
Estimation of nickel as DMG.
12. pH metry (acid – basic titration ) – not basic.
* Minimum 10 experiments shall be offered TOTAL : 45 PERIODS
INSTRUMENTS REQUIRED
1. UV/Vis Spectrophotometer
2. Colorimeter
3. pH meter
4. Flame photometer
5. Conductivity meter
6. Glass electrodes
7. Kjeldal’s apparatus
8. Potentiometer
No comments:
Post a Comment
Any doubt ??? Just throw it Here...