ME2402 COMPUTER INTEGRATED MANUFACTURING SYLLABUS | ANNA UNIVERSITY BE MECHANICAL ENGINEERING 7TH SEMESTER SYLLABUS REGULATION 2008 2011-2012 BELOW IS THE ANNA UNIVERSITY SEVENTH SEMESTER B.E. MECHANICAL ENGINEERING DEPARTMENT SYLLABUS IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011-2012 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
ME2402 COMPUTER INTEGRATED MANUFACTURING L T P C
3 0 0 3 OBJECTIVE:
This course will enable the student
To gain knowledge about the basic fundamental of CAD.
To gain knowledge on how computers are integrated at various levels of planning
and manufacturing understand computer aided planning and control and computer
monitoring.
UNIT I COMPUTER AIDED DESIGN 9
Concept of CAD as drafting and designing facility, desirable features of CAD package,
drawing features in CAD – Scaling, rotation, translation, editing, dimensioning, labeling,
Zoom, pan, redraw and regenerate, typical CAD command structure, wire frame
modeling, surface modeling and solid modeling (concepts only) in relation to popular
CAD packages.
UNIT II COMPONENTS OF CIM 9
CIM as a concept and a technology, CASA/Sme model of CIM, CIM II, benefits of CIM,
communication matrix in CIM, fundamentals of computer communication in CIM – CIM
data transmission methods – seriel, parallel, asynchronous, synchronous, modulation,
demodulation, simplex and duplex. Types of communication in CIM – point to point
(PTP), star and multiplexing. Computer networking in CIM – the seven layer OSI model,
66
LAN model, MAP model, network topologies – star, ring and bus, advantages of
networks in CIM
UNIT III GROUP TECHNOLOGY AND COMPUTER AIDED PROCESS
PLANNING 9
History Of Group Technology – role of G.T in CAD/CAM Integration – part familiesclassification
and coding – DCLASS and MCLASS and OPTIZ coding systems – facility
design using G.T – benefits of G.T – cellular manufacturing.Process planning - role of
process planning in CAD/CAM Integration – approaches to computer aided process
planning – variant approach and generative approaches – CAPP and CMPP systems.
UNIT IV SHOP FLOOR CONTROL AND INTRODUCTION TO FMS 9
shop floor control – phases – factory data collection system – automatic identification
methods – Bar code technology – automated data collection system.
FMS – components of FMS – types – FMS workstation – material handling and storage
system –FMS layout- computer control systems – applications and benefits.
UNIT V COMPUTER AIDED PLANNING AND CONTROL AND COMPUTER
MONITORING 9
Production planning and control – cost planning and control – inventory management –
material requirements planning (MRP) – shop floor control. Lean and Agile
Manufacturing. Types of production monitoring systems – structure model of
manufacturing – process control and strategies – direct digital control.
TOTAL: 45 PERIODS
TEXT BOOK:
1. Mikell. P. Groover “Automation, Production Systems and Computer Integrated
Manufacturing”, Pearson Education 2001.
REFERENCES:
1. Mikell. P. Groover and Emory Zimmers Jr.,“CAD/CAM”, Prentice hall of India Pvt.
Ltd., 1998.
2. James A. Regh and Henry W. Kreabber, “Computer Integrated Manufacturing”,
Pearson Education second edition, 2005.
3. Chris McMahon and Jimmie Browne, “CAD CAM Principles, Practice and
Manufacturing Management”, Pearson Education second edition, 2005.
4. Ranky, Paul G., “Computer Integrated Manufacturing”, Prentice hall of India Pvt. Ltd.,
2005.
5. Yorem Koren, “ Computer Integrated Manufacturing”, McGraw Hill, 2005.
6. P N Rao, “ CAD/CAM Principles and Applications”, TMH Publications, 2007.
ME2402 COMPUTER INTEGRATED MANUFACTURING L T P C
3 0 0 3 OBJECTIVE:
This course will enable the student
To gain knowledge about the basic fundamental of CAD.
To gain knowledge on how computers are integrated at various levels of planning
and manufacturing understand computer aided planning and control and computer
monitoring.
UNIT I COMPUTER AIDED DESIGN 9
Concept of CAD as drafting and designing facility, desirable features of CAD package,
drawing features in CAD – Scaling, rotation, translation, editing, dimensioning, labeling,
Zoom, pan, redraw and regenerate, typical CAD command structure, wire frame
modeling, surface modeling and solid modeling (concepts only) in relation to popular
CAD packages.
UNIT II COMPONENTS OF CIM 9
CIM as a concept and a technology, CASA/Sme model of CIM, CIM II, benefits of CIM,
communication matrix in CIM, fundamentals of computer communication in CIM – CIM
data transmission methods – seriel, parallel, asynchronous, synchronous, modulation,
demodulation, simplex and duplex. Types of communication in CIM – point to point
(PTP), star and multiplexing. Computer networking in CIM – the seven layer OSI model,
66
LAN model, MAP model, network topologies – star, ring and bus, advantages of
networks in CIM
UNIT III GROUP TECHNOLOGY AND COMPUTER AIDED PROCESS
PLANNING 9
History Of Group Technology – role of G.T in CAD/CAM Integration – part familiesclassification
and coding – DCLASS and MCLASS and OPTIZ coding systems – facility
design using G.T – benefits of G.T – cellular manufacturing.Process planning - role of
process planning in CAD/CAM Integration – approaches to computer aided process
planning – variant approach and generative approaches – CAPP and CMPP systems.
UNIT IV SHOP FLOOR CONTROL AND INTRODUCTION TO FMS 9
shop floor control – phases – factory data collection system – automatic identification
methods – Bar code technology – automated data collection system.
FMS – components of FMS – types – FMS workstation – material handling and storage
system –FMS layout- computer control systems – applications and benefits.
UNIT V COMPUTER AIDED PLANNING AND CONTROL AND COMPUTER
MONITORING 9
Production planning and control – cost planning and control – inventory management –
material requirements planning (MRP) – shop floor control. Lean and Agile
Manufacturing. Types of production monitoring systems – structure model of
manufacturing – process control and strategies – direct digital control.
TOTAL: 45 PERIODS
TEXT BOOK:
1. Mikell. P. Groover “Automation, Production Systems and Computer Integrated
Manufacturing”, Pearson Education 2001.
REFERENCES:
1. Mikell. P. Groover and Emory Zimmers Jr.,“CAD/CAM”, Prentice hall of India Pvt.
Ltd., 1998.
2. James A. Regh and Henry W. Kreabber, “Computer Integrated Manufacturing”,
Pearson Education second edition, 2005.
3. Chris McMahon and Jimmie Browne, “CAD CAM Principles, Practice and
Manufacturing Management”, Pearson Education second edition, 2005.
4. Ranky, Paul G., “Computer Integrated Manufacturing”, Prentice hall of India Pvt. Ltd.,
2005.
5. Yorem Koren, “ Computer Integrated Manufacturing”, McGraw Hill, 2005.
6. P N Rao, “ CAD/CAM Principles and Applications”, TMH Publications, 2007.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...