EI2208 ELECTRICAL MACHINES LABORATORY SYLLABUS | ANNA UNIVERSITY BE E&I ELECTRONICS AND INSTRUMENTATION ENGINEERING 3RD SEMESTER SYLLABUS REGULATION 2008 2011-2012 BELOW IS THE ANNA UNIVERSITY THIRD SEMESTER BE ELECTRONICS AND INSTRUMENTATION ENGINEERING DEPARTMENT SYLLABUS IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011-2012 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
EI2208 ELECTRICAL MACHINES LABORATORY L T P C
(Common to EIE & ICE) 0 0 3 2
1. Open circuit characteristic of DC Shunt Generator.
2. Load test on DC Shunt Generator.
3. Speed control of DC Shunt Motor.
4. Brake test on DC Shunt Motor.
5. Brake test on DC Series Motor.
6. Regulation characteristic of three - phase Alternator.
7. Open circuit and short circuit tests on Single - phase Transformer.
8. Load test on Single - phase Transformer
9. Load test on Three - phase Induction Motor.
10. Brake test on Single - phase Induction Motor.
11. ‘V’ curves of Synchronous Motor.
12. Power measurement in three - phase circuit using two - wattmeter
method.
P: 45 TOTAL : 45 PERIODS
REQUIREMENT FOR A BATCH OF 30 STUDENTS
S.No. Description of Equipment Quantity required Quantity available Deficiency %
1. D.C motor – Generator set D.C motor – Shunt Generator D.C motor – Compound Generator 2 set 2 set
2. D.C. Shunt Motor 2 Nos.
3. D.C. Series Motor 1 No.
4. D.C. Compound Motor 1 No.
5. Single phase transformers 7 Nos.
6. Three phase transformers 2 Nos.
7. D.C. Motor – Alternator set 4 sets
8. Three phase Induction Motor (Squirrel cage) 3 Nos.
9. Three phase slip ring Induction Motor 1 No. 32
10. Single phase Induction Motor 2 Nos.
11. Resistive load
3 phase – 2 , single phase - 3 5 Nos.
12. Inductive load 1 No.
13. Single phase Auto transformer 5 Nos.
14. Three phase Auto transformer 3 Nos.
15. Moving Coil Ammeter of different
ranges 20 Nos.
16. Moving Coil Voltmeter of different
ranges 20 Nos.
17. Moving Iron Ammeter of different
ranges 20 Nos.
18. Moving Iron voltmeter of different
ranges 20 Nos.
19. Wire wound Rheostats of different ratings 30 Nos.
20. Tachometers 10 Nos.
21. Single element wattmeters of different ranges UPF / LPF 20 Nos.
22. Double element wattmeters of different ranges 4 Nos.
23. Power factor meter 2 Nos.
24. Digital multimeter 5 Nos.
25. Three point starter, four point starter,DOL starter, manual star / delta starter, semi automatic and fully automatic star / delta starter 1 No each for study experiment
26. SCR based semi and fully controlled rectifier module 2 Nos.
27. SCR based chopper module 2 Nos.
28. SCR based inverter module 2 Nos.
29. SCR based AC voltage regulation module 2 Nos.
30. SCR, MOSFET, IGBT Trainer module Each 2 Nos.
EI2208 ELECTRICAL MACHINES LABORATORY L T P C
(Common to EIE & ICE) 0 0 3 2
1. Open circuit characteristic of DC Shunt Generator.
2. Load test on DC Shunt Generator.
3. Speed control of DC Shunt Motor.
4. Brake test on DC Shunt Motor.
5. Brake test on DC Series Motor.
6. Regulation characteristic of three - phase Alternator.
7. Open circuit and short circuit tests on Single - phase Transformer.
8. Load test on Single - phase Transformer
9. Load test on Three - phase Induction Motor.
10. Brake test on Single - phase Induction Motor.
11. ‘V’ curves of Synchronous Motor.
12. Power measurement in three - phase circuit using two - wattmeter
method.
P: 45 TOTAL : 45 PERIODS
REQUIREMENT FOR A BATCH OF 30 STUDENTS
S.No. Description of Equipment Quantity required Quantity available Deficiency %
1. D.C motor – Generator set D.C motor – Shunt Generator D.C motor – Compound Generator 2 set 2 set
2. D.C. Shunt Motor 2 Nos.
3. D.C. Series Motor 1 No.
4. D.C. Compound Motor 1 No.
5. Single phase transformers 7 Nos.
6. Three phase transformers 2 Nos.
7. D.C. Motor – Alternator set 4 sets
8. Three phase Induction Motor (Squirrel cage) 3 Nos.
9. Three phase slip ring Induction Motor 1 No. 32
10. Single phase Induction Motor 2 Nos.
11. Resistive load
3 phase – 2 , single phase - 3 5 Nos.
12. Inductive load 1 No.
13. Single phase Auto transformer 5 Nos.
14. Three phase Auto transformer 3 Nos.
15. Moving Coil Ammeter of different
ranges 20 Nos.
16. Moving Coil Voltmeter of different
ranges 20 Nos.
17. Moving Iron Ammeter of different
ranges 20 Nos.
18. Moving Iron voltmeter of different
ranges 20 Nos.
19. Wire wound Rheostats of different ratings 30 Nos.
20. Tachometers 10 Nos.
21. Single element wattmeters of different ranges UPF / LPF 20 Nos.
22. Double element wattmeters of different ranges 4 Nos.
23. Power factor meter 2 Nos.
24. Digital multimeter 5 Nos.
25. Three point starter, four point starter,DOL starter, manual star / delta starter, semi automatic and fully automatic star / delta starter 1 No each for study experiment
26. SCR based semi and fully controlled rectifier module 2 Nos.
27. SCR based chopper module 2 Nos.
28. SCR based inverter module 2 Nos.
29. SCR based AC voltage regulation module 2 Nos.
30. SCR, MOSFET, IGBT Trainer module Each 2 Nos.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...