CH2209 FLUID MECHANICS LAB SYLLABUS | ANNA UNIVERSITY B.TECH. CHEMICAL ENGINEERING 3RD SEMESTER SYLLABUS REGULATION 2008 2011-2012 BELOW IS THE ANNA UNIVERSITY THIRD SEMESTER B.TECH. CHEMICAL ENGINEERING DEPARTMENT SYLLABUS IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011-2012 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
CH2209 FLUID MECHANICS LAB L T P C
0 0 3 2
AIM
To determine experimentally the flow characteristics of fluids and also to determine the
efficiency of the flow measuring devices and fluid transport machineries.
OBJECTIVES: To gain practical knowledge on the measurement of Fluid Flow and their
characteristics at different operating conditions.
LIST OF EXPERIMENTS*
1. Calibration of constant and variable Head meters
2. Calibration of Weirs
3. Drag reduction studies
4. Flow through straight pipe
5. Pressure drop studies in packed column
6. Pressure drop studies in Fluidized bed
7. Flow through fittings / valves
8. Open drum orifice and draining time
9. Flow through helical and spiral Coil
10. Characteristic curves of centrifugal pump
11. Characteristic curves of Gear pump
12. Characteristic curves of Reciprocating pump
13. Viscosity measurement of non Newtonian fluids
14. Flow through annular pipe of horizontal concentric pipe
TOTAL: 45 PERIODS
LIST OF EQUIPMENTS REQUIRED
1. Orifice Meter with U tube manometer
2. Venturi meter with U tube Manometer
3. V-notch and circular Notch weirs.
4. Straight pipes with U tube Manometers
5. Packed column with U tube manometer.
6. Fluidized column with U tube manometer.
7. Flow loops for pipes, fittings and valves.
8. Open drum orifice.
9. Helical coil of different diameter.
10. Centrifugal pump with sump and pressure gauge (Vertical discharge & horizontal
discharge).
11. Reciprocating pump with sump and pressure gauge (Vertical discharge &
horizontal discharge).
12. Gear pump with sump and pressure gauge (Vertical discharge & horizontal
discharge).
13. Horizontal double pipe (concentric pipes) with U tube Manometer
Minimum 10 experiments shall be offered
CH2209 FLUID MECHANICS LAB L T P C
0 0 3 2
AIM
To determine experimentally the flow characteristics of fluids and also to determine the
efficiency of the flow measuring devices and fluid transport machineries.
OBJECTIVES: To gain practical knowledge on the measurement of Fluid Flow and their
characteristics at different operating conditions.
LIST OF EXPERIMENTS*
1. Calibration of constant and variable Head meters
2. Calibration of Weirs
3. Drag reduction studies
4. Flow through straight pipe
5. Pressure drop studies in packed column
6. Pressure drop studies in Fluidized bed
7. Flow through fittings / valves
8. Open drum orifice and draining time
9. Flow through helical and spiral Coil
10. Characteristic curves of centrifugal pump
11. Characteristic curves of Gear pump
12. Characteristic curves of Reciprocating pump
13. Viscosity measurement of non Newtonian fluids
14. Flow through annular pipe of horizontal concentric pipe
TOTAL: 45 PERIODS
LIST OF EQUIPMENTS REQUIRED
1. Orifice Meter with U tube manometer
2. Venturi meter with U tube Manometer
3. V-notch and circular Notch weirs.
4. Straight pipes with U tube Manometers
5. Packed column with U tube manometer.
6. Fluidized column with U tube manometer.
7. Flow loops for pipes, fittings and valves.
8. Open drum orifice.
9. Helical coil of different diameter.
10. Centrifugal pump with sump and pressure gauge (Vertical discharge & horizontal
discharge).
11. Reciprocating pump with sump and pressure gauge (Vertical discharge &
horizontal discharge).
12. Gear pump with sump and pressure gauge (Vertical discharge & horizontal
discharge).
13. Horizontal double pipe (concentric pipes) with U tube Manometer
Minimum 10 experiments shall be offered
No comments:
Post a Comment
Any doubt ??? Just throw it Here...